The programming simplicity to all its glory!
E_EPROM Programmer is a simple programmer for EPROM and EEPROM
memory chips. With this programmer you will be able
to read, write and erase the contents of a memory chip.
The circuit you have to build isn't
so difficult (it has too many wires though) and it is connected to
the parallel port of your computer.
You simple load the data to be written
from binary or hexadecimal files (INHX8M format. The
very well known HEX format we use with microcontrollers).
In order to use this program you must build the circuit
described in the article:
Programmer for EPROM and EEPROM memory types. You will also
find the step by step instructions on how to use the program.
Attention: The program is establishing a direct
input-output access to the parallel port of your computer
(Direct I/O). This is the reason we use the known driver
more). From the version 1.2 of the programmer you don't
have to manually enable the driver. Everything is been done
E_EPROM Programmer (version 1.2) - Greek
(Screenshot) -> Click to download current version
|Download current version:
Compatible with the following operating systems:
||Windows 9x (95, 98 and Me)
||Windows XP (2000 and NT)
||Windows Vista and 7